Deep sea Electronics

DSE has been designing and delivering market leading engine & generator control modules and accessories, ATS control modules and battery chargers for over 35 years. We pride ourself on using as many British sourced components as possible. All our controllers are sourced from Deep Sea Electronics who’s factory is only a few miles away from us. Ultra Gensets is willing and keen to meet any requirement for diesel generator control can be met with the implementation of an appropriate control system, such as remote start, remote monitoring, condition monitoring and shutdown control, synchronisation in parallel with other generators, synchronisation with mains incoming supply, manual and automatic mains failure panels, dual mutual control panels and bespoke panels and switchgear.

DSE-Section-01@3x

DSE334

The DSE334 is an Automatic Transfer Switch Controller. The DSE334 will monitor the voltage and frequency of the incoming AC supply from two different sources, which could be from both generator or mains (utility), or a combination of both. The module will monitor S1 (source 1) and in the event of a failure will issue a start command to S2 (source 2).

DSE330

The DSE330 is an Automatic Transfer Switch Controller. The module will monitor the voltage and frequency of the incoming S1 AC supply and in the event of failure will issue a start command to S2.
Once S2 is available and producing an output within limits, the DSE330 will control the transfer device and switch the load from S1 to S2.

DSE331

The DSE331 is an Automatic Transfer Switch Controller. The module will monitor the voltage and frequency of the incoming S1 AC supply and in the event of failure will issue a start command to S2.
Once S2 is available and producing an output within limits, the DSE331 will control the transfer device and switch the load from S1 to S2. Once the S1 supply returns to within limits, the module will command a return to S1 and shut down S2.

DSE333

The DSE333 is an Automatic Transfer Switch controller for genset and other applications. The module will monitor the voltage and frequency of the incoming AC mains (utility) supply and in the event of a failure, will issue a start command to the generator control system.

DSE-Section-02@3x

DSE3210

The DSE3210 can be utilised as a Manual or Auto Start Module for single gen-set applications or engine only applications.

DSE701

The DSE701 is available in Manual and Auto Start versions, offering an excellent range of engine monitoring and protection features.

DSE701 MKII

The DSE701 MKII controller can be user-configured for Auto or Manual Start operation using the DSE Configuration Suite Lite PC Software.

DSE7220

The DSE7220 is an Auto Mains (Utility) Failure Control Module suitable for a wide variety of single, diesel or gas, gen-set applications.

DSE402 MKII

The DSE402 MKII is a waterproof Manual/Automatic Start Control Module designed for genset and other applications.

DSE8620

The DSE8620 is an Auto Mains (Utility) Failure Control Module suitable for paralleling single gensets (diesel or gas) with the mains (utility) supply.

DSE8760

The DSE8700 Series is an easy-to use, rear-mounted, multi-generator loadshare system, designed to synchronise up to 32 generators including electronic and non-electronic engines.

DSE7110

The DSE7110 is an Auto Start Control Module suitable for a wide variety of single, diesel or gas, genset applications.